Cisco Systems ASR9001s, 9001S manual AC Powered Routers, AC Power Cord Illustrations

Chapter 1 Preparing for Installation

Site Requirement Guidelines

Caution Each Cisco ASR 9001 Router is powered by only one type of input: AC or DC. A hybrid (AC+DC) power configuration is not supported.

Caution Proper grounding is necessary to avoid damage from lightning and power surges. See the “NEBS Supplemental Unit Bonding and Grounding Guidelines” section on page 1-20for grounding requirements.

AC Powered Routers

AC power modules operate in the input range of 100 VAC to 240 VAC, 50 to 60 Hz and require a minimum service of:

•15 A for operation in North America and Japan

•10 A for international operation

•13 A for operation in the UK

Each of the AC power inputs requires a separate dedicated branch circuit. For a list of the nominal and acceptable value ranges for source AC power, see Table A-5.

Table 1-1lists the AC-input power cord options, specifications, and Cisco product numbers for the AC-input power supply modules. Table 1-1also references power cord illustrations. For more information on Cisco product numbers (PIDs) and their detailed description of power cords, refer to Dynamic Configuration Tool.

Table 1-1	AC-Input Power Cord Options for ASR 9001 Router
				Power Cord	Reference
Locale		Part Number	Length	Rating	Illustration
USA		CAB-AC	8.2 feet (2.5 m)	15 A, 250 V	Figure 1-9
Japan		CAB-L620P-C13-JPN	8.2 feet (2.5 m)	15 A, 250 V	Figure 1-10
Australia		CAB-ACA	8.2 feet (2.5 m)	10 A, 250 V	Figure 1-11
Italy		CAB-ACI	8.2 feet (2.5 m)	10 A, 250 V	Figure 1-12
Argentina		CAB-ACR	8.2 feet (2.5 m)	10 A, 250 V	Figure 1-13
Switzerland		CAB-ACS	8.2 feet (2.5 m)	10 A, 250 V	Figure 1-14
UK		CAB-ACU	8.2 feet (2.5 m)	13 A, 250 V	Figure 1-15
China		CAB-ACC	8.2 feet (2.5 m)	10 A, 250 V	Figure 1-16
South Africa/India		CAB-ACSA	8.2 feet (2.5 m)	10 A, 250 V	Figure 1-17
Europe		CAB-9K10A-EU	8.2 feet (2.5 m)	10 A, 250 V	Figure 1-18
Israel		SFS-250V-10A-IS	8.2 feet (2.5 m)	10 A, 250 V	Figure 1-19

AC Power Cord Illustrations

This section contains the AC power cord illustrations, as described in Table 1-1. Note that an AC power cord may be used with several power supplies.

	Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02		1-13