Chapter 1 Preparing for Installation
Site Requirement Guidelines
Figure 1-20 shows the type of terminal block required for DC-input cable connections.
Figure 1-20 DC Power Cable Terminal Block
331934
Figure 1-21 shows DC power source cable connections for single DC power module.
Warning To avoid shock hazard, be sure to apply shrink wrap tubing around the wire entry area of the terminal block.
Warning Hazardous voltage or energy may be present on power terminals. Always replace cover when terminals are not in service. Be sure uninsulated conductors are not accessible when cover is in place. Statement 1086
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
| Cisco ASR 9001 and Cisco ASR |
