Cisco Systems ATA186I2ARF manual Call Command Behavior

Chapter 6 Call Commands

Call Command Behavior

Table 6-4 Call Command Behavior (continued)

Cisco ATA State and its Definition	Summary of Commands (Input Sequence and Actions)
3WAYCALLING: Cisco ATA is	United States:
connected to two far end users on the	• R—Retrieve the WFE and go to CONFERENCE state.
same line; one of them is in active
	• ONH—Transfer the WFE to the AFE, drop out of the call, and go to
conversation (the active far end or AFE)
while the other is on-hold (the waiting far	PREDIAL state.
end or WFE). This state is initially	Sweden:
entered when the Cisco ATA is connected
	• Same as for CALLWAITING state
to one of the far ends, then places this far
end on hold and calls the second far end.
CONFERENCE: Cisco ATA is connected	United States:
to two active far ends simultaneously;	• R—Disconnect the last callee and stay connected with the first party, and
Cisco ATA performs audio mixing such
	revert to CONNECTED state.
that every party can hear the other two
	Sweden:
parties but not themselves.
	• R4—Transfer one FE to the other, drop out of the call, and go to PREDIAL
	state.
PREDIAL_HOLDING: Cisco ATA user	United States and Sweden:
places a connected call on-hold and	• *,#—Stop dial-tone, go to CONFIG_HOLDING state, and prepare to collect
prepares to dial a second number;
	a configuration command.
Cisco ATA plays dial-tone.
	• 0-9—Stop dial-tone, go to DIALING_HOLDING state, and prepare to
	complete dialing a second phone number.
	All Regions:
	• Stop dial-tone, retrieve the WFE, and revert to CONNECTED state.
CONFIG_HOLDING: A connected FE is	United States:
placed on hold, while the Cisco ATA is	• *67—CLIR for the next call
entering a configuration command.
	• *82—CLIP for the next call
	• #90v#—Blind transfer to the number specified in 'v'; disconnect the call and
	go to PREDIAL state.
	Sweden:
	• #31# or *31#—CLIR in the next call
	• *90*v#—Blind transfer to the number specified in 'v'; disconnect the call
	and go to PREDIAL (non-standard) state.
	All Regions:
	• R or any unrecognized sequence—Abort configuration, restart dial tone, and
	go to PREDIAL_HOLDING state.
	• A complete configuration sequence—Carry out the command, and go to
	PREDIAL_HOLDING state.
DIALING_HOLDING: Cisco ATA user	• Collected digits match a dial-plan rule—Call the new number, and go to
is entering a second phone number to call	CALLING_HOLDING state
while placing a connected call on hold	• R—Abort dialing and revert to PREDIAL_HOLDING state.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)

6-10 OL-3410-01