Cisco Systems ATA186I2ARF manual Operating Parameters, NatTimer, Bitmap, 208

Chapter 5 Parameters and Defaults

Operating Parameters

NatTimer

Description

This parameter allows you to specify a retransmission interval for sending a dummy packet to NatServer. The interval is in seconds and is specified in bits 0-11 of this parameter. The upper 20 bits are reserved and should be set to 0.

Value Type

Bitmap

Default

0, which means that no dummy packets will be sent to the NatServer.

Voice Configuration Menu Access Code

208

Operating Parameters

This section describes the following parameters, which are located in the green portion of the Cisco ATA Web Configuration Page:

•LBRCodec, page 5-20

•AudioMode, page 5-20

•RxCodec, page 5-21

•TxCodec, page 5-22

•NumTxFrames, page 5-22

•CallFeatures, page 5-23

•PaidFeatures, page 5-24

•CallerIdMethod, page 5-25

•FeatureTimer, page 5-26

•Polarity, page 5-27

•ConnectMode, page 5-28

•AutMethod, page 5-30

•TimeZone, page 5-30

•NTPIP, page 5-30

•AltNTPIP, page 5-31

•DNS1IP, page 5-31

•DNS2IP, page 5-31

•UDPTOS, page 5-32

•SigTimer, page 5-32

•OpFlags, page 5-34

•VLANSetting, page 5-35

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)

OL-3410-01 5-19