Chapter 3 Configuring the Cisco ATA for SIP
Steps Needed to Configure the Cisco ATA
Table
Action | Reference | |
|
|
|
6. | Configure the method with which the Cisco ATA will locate the | Configuring the Cisco ATA to Obtain its |
| TFTP server at boot up time. | Configuration File from the TFTP Server, page |
|
|
|
7. | Power up the Cisco ATA. |
|
|
|
|
8. | If you make configuration changes to the Cisco ATA or upgrade | Refreshing or Resetting the Cisco ATA, page |
| the signaling image on the TFTP server, you can refresh the |
|
| Cisco ATA so that these changes take effect immediately. |
|
| Otherwise, these changes will take effect when the specified |
|
| interval (CfgInterval parameter value) for the TFTP query |
|
| expires. |
|
|
|
|
Basic Configuration Steps in a Non-TFTP Server Environment
Table
Table
Action | Reference |
1.Download the desired Cisco ATA release software zip file from the Cisco web site:
a.If you are a registered CCO user. go to the following URL:
b.Download the zip file that contains the software for the applicable release and signaling image you are using. The contents of each file are described next to the file name.
c.Extract the files to the desired location on your PC.
| Note The file that contains the protocol signaling image has an extension of .zup. |
|
| |
|
|
|
| |
|
|
| ||
2. | Manually upgrade the Cisco ATA to the correct signaling image. | Upgrading the Signaling | ||
|
|
| Image Manually, page | |
|
|
|
| |
3. | Configure the Cisco ATA by using either one of the | • | Voice Configuration | |
|
|
|
| Menu, page |
|
|
| • | Cisco ATA Web |
|
|
|
| Configuration Page, |
|
|
|
| page |
4.Power up the Cisco ATA.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
| ||
|
