Cisco Systems ATA186I2ARF manual Cwt, WFE cancels the call-Stop CWT and revert to Connected state

Chapter 6 Call Commands

Call Command Behavior

Table 6-4 Call Command Behavior (continued)

Cisco ATA State and its Definition	Summary of Commands (Input Sequence and Actions)
RINGING: Cisco ATA is ringing the	• OFH—Stop ringing, answer the call, and go to CONNECTED state.
phone to alert user of an incoming call
CONNECTED: The Cisco ATA is	United States and Sweden:
connected with one far end party;	• R—Hold current call, play dial-tone to dial second number, and go to
Cisco ATA may be the caller or the callee
	PREDIAL_HOLDING state.
WAITHOOK: Far end hangs up while in	• R—Stop fast-busy, start dial-tone, and go to PREDIAL state.
CONNECTED state; Cisco ATA plays
fast-busy after five seconds in this state
CONNECTED_ALERTING: Cisco ATA	United States:
receives another call while in	• R—Place current call on-hold, answer the waiting call, and go to
CONNECTED state; Cisco ATA plays
	CALLWAITING state.
Call Waiting tone periodically (every 10
	Sweden:
seconds for US; every second for
Sweden)	• R0—Continue current call, reject the waiting call, and revert to
	CONNECTED state.
	• R1—Disconnect current call, answer the waiting call, and go to
	CONNECTED state.
	• R2—Place current call on-hold, answer waiting call, and go to
	CALLWAITING state.
	• R3—Continue with current call, answer the waiting call and go to
	CONFERENCE state.
	All Regions:
	• ONH—Disconnect current call and go to IDLE state (the Cisco ATA then
	automatically starts ringing the phone, and goes to RINGING state).
	• AFE hangs up—Go to WAITHOOK_ALERTING state, continue to play
	CWT.
	• WFE cancels the call—Stop CWT and revert to CONNECTED state.
CALL WAITING: Cisco ATA is	United States:
connected to two far end users on the	• R—Place the AFE on-hold and retrieve the WFE.
same line; one is in active conversation
	• ONH—Transfer the WFE to the AFE, drop out of the call, and go to
(the active far end or AFE) while the
other is on-hold (the waiting far end or	PREDIAL state.
WFE). This state is initially entered when	Sweden:
the Cisco ATA is connected to one of the	• R1—Disconnect current call, answer the waiting call, and go to
far ends while the other far end calls into
	CONNECTED state.
the Cisco ATA.
	• R2—Place the AFE on-hold and retrieve the WFE.
	• R3—Retrieve the WFE, and go to CONFERENCE state.
	• R4—Transfer the WFE to the AFE, drop out of the call, and go to PREDIAL
	state.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)

OL-3410-01 6-9