Chapter 5 Parameters and Defaults
Network Parameters
You can set CfgInterval to a random value to achieve random contact intervals from the Cisco ATA to the TFTP server.
Value Type
Decimal
Range
60 to 4294967295
Default
3600
Voice Configuration Menu Access Code
80002
EncryptKey
Description
This parameter specifies the encryption key that is used to encrypt the Cisco ATA configuration file on the TFTP server.
The cfgfmt tool, which is used to create a Cisco ATA binary configuration file (see the “Using the EncryptKey Parameter and cfgfmt Tool” section on page
Note If the Cisco ATA configuration file is not encrypted, the value must be set to 0.
Value Type
Alphanumeric string
Range
Maximum number of characters: 8
Default
0
Voice Configuration Menu Access Code
320
Network Parameters
This section describes the following parameters, which are located in the orange portion of the Cisco ATA Web Configuration Page:
•DHCP, page 5-7
•StaticIp, page 5-7
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
|
| |
|
