4-3
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Chapter4 Basic and Additional SIP Servi ces
Additional SIP Services
•LoginID0, page 5-12
•LoginID1, page 5-12
•PWD0, page 5-9
•PWD1, page 5-10

Setting the Codec

The LBRCodec (low-bit-rate codec) parameter determines w hether the G.723 or G.729A codec, in
addition to G.711A-law and G.711µ-law, can be used for receiving and transmitting. For configuration
information, see the “LBRCodec” section on page 5-20.

Configuring Refresh Interval

When the value specified in the CfgInterval parameter is reached, the CiscoATA attempts to refresh its
configuration file from the TFTP server. By opening a web page for the Cisco ATA, you can perform a
refresh before the scheduled refresh. Set the CfgInterval paramet er to an interval value (in seconds) for
refreshing the CiscoATA configuration file. Cisco recommends that the interval be semi-random to
prevent many simultaneous contacts with the TFTP server. For more information, see the “CfgInterval”
section on page 5-5.
When the CiscoATA contacts the TFTP server, it also checks to see if an upgrade signaling image has
been placed on the TFTP server. If such an image exists, the CiscoATA will download this image.
Additional SIP Services
This section describes additional SIP services and, where applicable, provides configuration information
and cross references to the parameters for configuring these services . These services are listed
alphabetically.
•Advanced Audio Configuration, page 4-4
•Billable Features, page 4-4
•Comfort Noise During Silence Period When Using G.711, page 4-5
•Configurable Hook Flash Timing, page 4-5
•Configurable Mixing of Call Waiting Tone and Audio, page 4-5
•Configurable On-hook delay, page 4-5
•Debugging Diagnostics, page 4-5
•Dial Plan, page 4-6
•Disabling Access To The Web Interface, page 4-6
•Distinctive Ringing, page 4-6
•DNS SRV Support, page 4-6
•Hardware Information Display, page 4-7
•NAT Gateway, page 4-7
•NAT/PAT Translation, page 4-7