Table D-4 Log Listings | Cisco Systems ATA186I2ARF specification

Appendix D SIP Call Flows

Call Flow Scenarios for Successful Calls

Table D-4 Log Listings

1.REGISTER sip:192.168.2.81 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.194

From: <sip:9301@192.168.2.81;user=phone>

To: <sip:9301@192.168.2.81;user=phone>

Call-ID: 311316842@192.168.2.194

CSeq: 1 REGISTER

Contact: <sip:9301@192.168.2.194;user=phone;transport=udp>;expires=3600 User-Agent; Cisco ATA v2.10 ata186 (0705a)

Content-Length: 0

2.SIP/2.0 100 Trying

Via: SIP/2.0/UDP 192.168.2.194

Call-ID: 311316842@192.168.2.194

From: <sip:9301@192.168.2.81;user=phone>

To: <sip:9301@192.168.2.81;user=phone>

CSeq: 1 REGISTER

Content-Length: 0

3.SIP/2.0 407 Proxy Authentication Required Via: SIP/2.0/UDP 192.168.2.194 Call-ID:311316842@192.168.2.194

From: <sip:9301@192.168.2.81;user=phone>

To: <sip:9301@192.168.2.81;user=phone>

CSeq: 1 REGISTER

Proxy-Authenticate: DIGEST realm=“CISCO”, nonce=“3bd5e334”

Content-Length: 0

4.REGISTER sip:192.168.2.81 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.194

From: <sip:9301@192.168.2.81;user=phone>

To: <sip:9301@192.168.2.81;user=phone>

Call-ID: 311316842@192.168.2.194

CSeq: 2 REGISTER

Contact: <sip:9301@192.168.2.194;user=phone;transport=udp>;expires=3600

User-Agent: Cisco ATA v2.10 ata186 (0705a)

Proxy-Authorization: Digest username=“9301”,realm=“CISCO”,nonce=“3bd5e334”,uri=“sip:192.168.2.81”,response=“87ac0afeb08222af706 f9e8b5c566ce2”

Content-Length: 0

5.SIP/2.0 100 Trying

Via: SIP/2.0/UDP 192.168.2.194

Call-ID: 311316842@192.168.2.194

From: <sip:9301@192.168.2.81;user=phone>

To: <sip:9301@192.168.2.81;user=phone>

CSeq: 2 REGISTER

Content-Length: 0

6.SIP/2.0 200 OK

Via: SIP/2.0/UDP 192.168.2.194

Call-ID: 311316842@192.168.2.194

From: <sip:9301@192.168.2.81;user=phone>

To: <sip:9301@192.168.2.81;user=phone>

CSeq: 2 REGISTER

Contact: <sip:9301@192.168.2.194;user=phone;transport=udp>;expires=“tue, 23 Oct 2001 22:37:56 GMT”

Expires: 3600

Content-Length: 0

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)

	OL-3410-01	D-5

Image 187

Cisco Systems ATA186I2ARF manual Table D-4 Log Listings

Contents

Text Part Number OL-3410-01 Corporate Headquarters Copyright 2003, Cisco Systems, Inc All rights reserved Iii N T E N T S What You Need Dial Plan Disabling Access To The Web Interface Dhcp Vii DNS1IP DNS2IP Viii Action Identifiers Debugging Environmental Specifications C-2 This preface includes the following sections PrefaceOverview Audience Xii OrganizationConventions Chapter Description Xiii Xiv Related Documentation Ordering Documentation Obtaining DocumentationWorld Wide Web Documentation CD-ROM Xvi Obtaining Technical AssistanceCisco.com Technical Assistance Center Cisco TAC Escalation Center Cisco TAC Web SiteXvii Xviii Cisco ATA Analog Telephone Adaptor Cisco Analog Telephone Adaptor Overview Pstn Session Initiation Protocol SIP Overview Components of SIP SIP Capabilities SIP Servers SIP Clients Link LED Hardware Overview Function Button Voice Codecs Supported Software Features Cisco ATA SIP Services Additional Supported Signaling ProtocolsOther Supported Protocols Register Invite BYE Cancel Fax ServicesMethods Supported Action Reference Installation and Configuration OverviewSupplementary Services Notify Options ACK Installing the Cisco ATA Network Requirements Safety RecommendationsWhat the Cisco ATA Package Includes 5V power adaptor Power cord Installation ProcedureWhat You Need Cisco ATA 186 Rear Panel Connections Procedure Installing the Cisco ATA Installation Procedure Power-Down Procedure Configuring the Cisco ATA for SIP Default Boot Load Behavior OpFlags Parameter and Bits Reference Example VLANSettingFeature Bits Basic Configuration Steps in a Tftp Server Environment Steps Needed to Configure the Cisco ATA Action Basic Configuration Steps in a Non-TFTP Server EnvironmentConfigure the method with which the Cisco ATA will locate Tftp server at boot up time Setting Up the Tftp Server with Cisco ATA Software Configuring the Cisco ATA Using a Tftp ServerConfigurable Features and Related Parameters Creating Unique and Common Cisco ATA Configuration Files Syntax Save this file of Cisco ATA-specific parameters as Command Example Using atapname.exe Tool to Obtain MAC Address Command Output Using the EncryptKey Parameter and cfgfmt ToolSyntax examples Atadefault.cfg Configuration File Using a Dhcp Server, Using a Dhcp Server Other Dhcp Options You Can Set Without Using a Dhcp Server Voice Configuration MenuDNS1IP DNS2IP Ntpip Voice Menu Number Features Using the Voice Configuration MenuDhcp Voice Menu Number Entering Alphanumeric Values Resetting the Cisco ATA to Factory Default Values Cisco ATA Web ConfigurationKey Alphanumeric Characters Page UID0 Refreshing or Resetting the Cisco ATA Procedure to Refresh the Cisco ATA Upgrading the SIP Signaling ImageProcedure to Reset the Cisco ATA Important Basic SIP Services Basic and Additional SIP ServicesRequired Parameters Related Configuration Parameters Establishing Authentication Setting the Codec Additional SIP ServicesConfiguring Refresh Interval Billable Features Advanced Audio ConfigurationRelated Parameters Configurable On-hook delay Comfort Noise During Silence Period When Using G.711Configurable Hook Flash Timing Configurable Mixing of Call Waiting Tone and Audio DNS SRV Support Disabling Access To The Web InterfaceDial Plan Distinctive Ringing NAT Gateway Hardware Information DisplayNAT/PAT Translation OutBoundProxy Support Network TimingProgress Tones Receiver-tagged VIA header Repeat Dialing on Busy Signal Stuttering Dial Tone on Unconditional Call Forward User Configurable Call Waiting Permanent Default SettingUser Configurable Timeout On No Answer for Call Forwarding SIP Proxy Server Redundancy Open your Web browser Setting Up and Placing a Call Without Using a SIP ProxyConfiguration To deactivate this feature, enter the following Placing an IP Call Complete Reference Table of all Cisco ATA SIP ServicesDial Format OL-3410-01 Configurable Feature Related Parameter Configurable Feature Related Parameter OL-3410-01 Parameters and Defaults Configuration Text File Template Range UIPasswordUser Interface UI Parameter Sections that follow describe these parameters UseTFTP Configuration ParameterParameters for Configuration Method ToConfig TftpURL Range Default Voice Configuration Menu Access CodeCfgInterval EncryptKey Network Parameters StaticRoute StaticIpIP address StaticNetMask Account Information Parameters255.255.255.0 UID0 This parameter is the password for the Phone 1 port GkOrProxy This parameter is the password for the Phone 2 port Not applicable to SIP UseLoginIDGateway Gateway2 LoginID1 LoginID0This parameter is the Login ID for line Integer Backup Server ParametersAltGkTimeOut AltGk UseSIP SIP ParametersGkTimeToLive GkId MAXRedirect SIPRegInterval205 Natip SIPRegOn MediaPort SIPPortOutBoundProxy 207 Is the default port if no port is specifiedNatServer IP address or Fqdn format 208 NatTimerOperating Parameters Bitmap 0x00150015 LBRCodecAudioMode 300 Bit Number Definition RxCodec NumTxFrames TxCodec Clipclir CallFeatures 315 PaidFeaturesFirst calling that number and consulting with the callee Examples CallerIdMethod 0x00019e60 FeatureTimer316 304 Polarity0x00000000 317 RTP ConnectMode Bit Number Definition 302 AutMethodTimeZone This parameter is not used for SIP 142 AltNTPIP916 0x01418564 SigTimer917 0xB8 Range 0 to 62 in seconds Default 100 0x64=100 secondsDefault-5 seconds Range 0 to 255 in 0.1 seconds 0x2 OpFlags 324 Optional Feature ParametersVLANSetting 0x0000002b TraceFlags NPrintfExtended IP address RingOnOffTime Default Recommended Values DialPlan IPDialPlan Additional DialPlan Information About Dial Plan Commands Following dial plans Following dial plan Rule to Support Hot/Warm Line Dial Plan Blocking In Rule Tone Parameter Syntax Call-Progress Tone ParametersRule to Support Dial Prefix List of Call-Progress Tone Parameters Use the following formula to calculate the scaling factor a How to Calculate Scaling Factors Recommended Values Default values for the nine-integer arraySpecific Call-Progress Tone Parameter Information 921 Cisco ATA plays the busy tone when the callee is busyOn-time-0 Off-time-0 Total time to play tone-1000 920 922 Off-time-2000 Total time to play tone-0923 925 CallCmdOff-time-2400 Total time to play tone-4800 924 930 Maximum of 248 characters Call Command Structure Call Commands CallCmd string has the following structure Syntax Identifier Context State of Cisco ATA Context-Identifiers Identifier Action Input Sequence IdentifiersAction Identifiers Identifier Input Sequence Call Command Example Hook-flash Cancel-the-call-attempt Retrieve-the-waiting-call Table Notations Call Command BehaviorCall Command Default Sweden Call Command Default Call Command Behavior CWT WFE cancels the call-Stop CWT and revert to Connected state Call Command Behavior Call Command Behavior OL-3410-01 Using Fax Pass-through Mode Configuring and Debugging Fax Services Translation Configuring the Cisco ATA for Fax Pass-through modeThis setting translates to the following bitmap AudioMode ConnectMode Configuring Cisco IOS Gateways to Enable Fax Pass-throughRecommended Setting This setting translates to the bitmap Run the following command Enable Fax Pass-through Mode Perform the command Disable Fax Relay Feature Configuring the Cisco ATA for Fax Mode Using FAX Mode Common Problems When Using IOS Gateways Debugging the Cisco ATA 186/188 Fax ServicesConfiguring the Cisco ATA for Fax Mode on a Per-Call Basis Configuring the Cisco IOS Gateway for Fax Mode Port Problem ActionCisco ATA, and 0x0012XXXX for the Phone 2 port For fax pass-through mode, AudioMode should be set to Prserv Overview Using prserv for Diagnosing Fax ProblemsAnalyzing prserv Output for Fax Sessions Terminating-Gateway Example Log event Description Possible Reasons for Failure Originating-Gateway Example Rtpcatch Overview Using rtpcatch for Diagnosing Fax ProblemsTo use rtpcatch, follow these steps Output Files Example of rtpcatch Explanation CED tone Detected Both sides use G.711 for the entire fax session Fax relay mode Cisco fax relay modeAnalyzing rtpcatch Output for Fax Sessions Analysis Example 7-4 T38 Fax Relay Mode Using rtpcatch to Analyze Common Causes of Failure Possible Causes for Failure Cisco fax relay option is not disabled on the gatewayPossible Cause for Failure Rtpcatch Limitations Example 7-9 Fax Pass-through Mode Failure OL-3410-01 Definitions Upgrading the Cisco ATA Signaling ImageUpgrading the Signaling Image from a Tftp Server Syntax of upgradecode Parameter Upgradecode parameter value could be Upgrading the Signaling Image ManuallyProcess Syntax Upgrade RequirementsPreliminary Steps Running the Executable File To perform the upgrade, follow these steps Upgrade Procedure Using a Web Browser Confirming a Successful Signaling Image Upgrade OL-3410-01 General Troubleshooting Tips Troubleshooting Symptoms and Actions Installation and Upgrade Issues 2* 1 1* 2* 8* 1 1* 7* 8* 1 1* 9* 0* 1 1* 9* 0* 0 Debugging REN Frequently Asked QuestionsFACTRESET# Ring Load per RJ-11 FXS Port Maximum Distance Contacting TAC Common Supplementary Services Using SIP Supplementary ServicesChanging Call Commands Cancelling a Supplementary Service Call-Waiting Caller ID Caller IDVoice Mail Indication Semi-unattended Transfer Unattended TransferFully Unattended Transfer Making a Conference Call in the United States Attended TransferMaking a Conference Call in Sweden Call Forwarding in the United States Call Waiting in the United StatesCall Waiting in Sweden About Call Forwarding Calling Line Identification Presentation Call Forwarding in SwedenCall Return in the United States Call Return in Sweden Calling Line Identification Restriction in Sweden Calling Line Identification Restriction in the United States OL-3410-01 Table B-1lists codes to return basic Cisco ATA information Voice Menu CodesVoice Menu Option Code Description DNS 2 IP DNS 1 IPPWD User ID telephone number for the Phone 2 port Tftp URLUID User ID telephone number for the Phone 1 port Option Code Description Physical Specifications Cisco ATA SpecificationsSpecification Description Specification Electrical SpecificationsEnvironmental Specifications Immunity Specifications Software Specifications Ringing CharacteristicsPhysical Interfaces Appendix C Cisco ATA Specifications Software Specifications Sccp SIP Compliance Reference Information OL-3410-01 Supported SIP Request Methods SIP Call Flows Call Flow Scenarios for Successful Calls Cisco ATA-to-SIP Server-Registration without AuthenticationStep Action Description Table D-2 Log Listings Cisco ATA-to-SIP Server-Registration with Authentication Table D-3 Action Descriptions Table D-4 Log Listings Invite Table D-5 Action Descriptions Table D-6 Log Listings Table D-6 Log Listings Table D-6 Log Listings Table D-6 Log Listings Trying Proxy Authentication Required ACK Table D-7 Action Descriptions Table D-8 Log Listings Table D-8 Log Listings Table D-8 Log Listings Table D-8 Log Listings Table D-8 Log Listings GL-1 GL-2 GL-3 Media Gateway Control Protocol Lightweight DirectoryAccess ProtocolLocation services are offered by location servers Local exchange carrier Messages can be part of Sgcp and Mgcp messages Signaling connection control partGL-5 GL-6 GL-7 Business-class services for Internet telephonyTraffic Allow you to define your own customized markup language GL-8 IN-1 D E CfgInterval parameter United States Call-progress tone parametersIN-2 IN-3 IN-4 Fax mode configuration 7-6,7-7 IN-5 Forward-on-no-answer settingForward-unconditionally setting FXS ports Natip parameter NatipIN-6 IN-7 RJ-45 LED IN-8 SIP registration SIP registration enabled IN-9 Unconditional call forwarding Unique configuration file IN-10