Cisco Systems ATA186I2ARF manual Call Command Behavior

Chapter 6 Call Commands

Call Command Behavior

Table 6-4 Call Command Behavior (continued)

Cisco ATA State and its Definition	Summary of Commands (Input Sequence and Actions)
CALLING_HOLDING: Cisco ATA is	•	R—Cancel the call and revert to PREDIAL_HOLDING state.
waiting for a second far end to respond	•	ONH—Cancel the call and transfer the waiting party to the callee, and revert
while placing a connected call on hold
		back to PREDIAL state.
WAITHOOK_HOLDING: The AFE	•	R—Retrieve the WFE and go to CONNECTED state.
hangs-up to disconnect the current call
while there is a WFE being put on hold
AITHOOK_ALERTING: The AFE hangs	•	R—Stop CWT, answer the waiting call, and go to CONNECTED state.
up while a waiting call alerts	•	WFE: Cancel the call; stop CWT, go to WAITHOOK state.
	• ONH—Go to IDLE state (in which Cisco ATA automatically starts ringing
		the phone, and goes to RINGING state).

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)

OL-3410-01 6-11