Chapter 3 Configuring the Cisco ATA for SIP

Configuring the Cisco ATA Using a TFTP Server

This completes the parameter settings and DHCP options you need to configure for this procedure. The Cisco ATA will contact the DHCP server for the IP address of the TFTP server that contains the Cisco ATA configuration file.

Procedure if DHCP Server is not Under Control of Cisco ATA Administrator

This is the procedure to use if the DHCP server is not under the control of the Cisco ATA administrator, which means that the URL of the TFTP server must be manually configured.

Procedure

Step 1 Using the voice configuration menu, set the parameter TftpURL to the IP address or URL of the TFTP server. For more information on setting the TftpURL parameter, see the “TftpURL” section on page 5-5. For information about using the Cisco ATA voice configuration menu, see the “Voice Configuration Menu” section on page 3-15.

Note If you are not using a DHCP server to provide the TFTP server location, you must manually configure the TftfURL. You can do this by using the voice configuration menu without first obtaining network connectivity for the Cisco ATA. If you want to configure this value using the Web configuration page, you first must obtain network connectivity by using the voice configuration menu to statically configure IP address information (see the “Voice Configuration Menu” section on page 3-15).

Step 2 Use the default value of 1 for the Cisco ATA parameter DHCP.

Step 3 Use the default value of 1 for the Cisco ATA parameter UseTftp.

This completes the parameter settings you need to configure for this procedure. The Cisco ATA will contact the manually configured TFTP server that contains the Cisco ATA configuration file.

Other DHCP Options You Can Set

The following parameters can also be configured with DHCP:

Boot file name of DHCP header—The ata<macaddress> binary Cisco ATA configuration file, which can have a maximum of 31 characters and can be any name with printable ASCII characters

Client PC address

DHCP option 1—Client Subnet Mask

DHCP option 3—Routers on the client’s subnet

DHCP option 6—One or two Domain Name servers

DHCP option 42—One or two Network Time Protocol servers

DHCP option 43—Set this option to identify the protocol (for example, SIP)

DHCP Option 60 (DHCP_VENDOR_CLASS_ID)—Use this parameter to identify the type of Cisco ATA box (ATA186 or ATA188).

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)

3-14

OL-3410-01

 

 

Page 48
Image 48
Cisco Systems ATA186I2ARF manual Other Dhcp Options You Can Set