Cisco Systems ATA186I2ARF manual Tftp URL, Uid, User ID telephone number for the Phone 1 port

Appendix B Voice Menu Codes

Table B-2 Cisco ATA Voice Menu Codes—Configuration Parameters (continued)

	Voice Menu
Option	Code	Description
Rx codec	36	Selects the audio codec type to use to decode
		received data. The call-receiving station
		automatically adjusts to the call-initiating station's
		audio codec type if the call-receiving station
		supports that audio codec.
Set password	7387277	Configuration interface password
Signal timers	318	Timeout values controlling the starting or stopping
		of a signaling event
SIP max number of redirects	205	Maximum number of redirections the Cisco ATA
		will attempt to reach a callee when making a call
SIP NAT IP address	200	WAN IP of the NAT
SIP outbound proxy	206	IP address of the outbound proxy server to which
		all outgoing SIP requests are sent
SIP port	201	Specifies which port the Cisco ATA listens to for
		incoming SIP messages
SIP protocol	38	Selects the signaling protocol
SIP registration On	204	Enables SIP registration
SIP registration period	203	Interval (in seconds) between each registration
		renewal to the SIP registration server
Subnet mask	10	Specifies the subnet mask for the Cisco ATA
TFTP URL	905	IP address of the TFTP server when TFTP
		configuration is used
Timezone	302	Specifies offset to GMT—used to time-stamp
		incoming calls for caller ID
ToConfig	80001	Identifies unconfigured or already-configured
		Cisco ATAs
Trace Fflags	313	Enables logging of debug information
Tx Codec	37	Selects transmitting audio codec preference
UDP TOS bits	255	Determines the precedence and delay of UDP IP
		packets
UID 0	3	User ID (telephone number) for the PHONE 1 port
UID 1	13	User ID (telephone number) for the PHONE 2 port
Use login ID	93	Determines which pair (UIDx, PWDx or LoginIDx,
		PWDx) to use for authentication
Use TFTP	305	Enables TFTP as configuration method

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)

OL-3410-01 B-3