5-26
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Chapter5 Parameters and Defaults
Operating Parameters
Default
0x00019e60
Voice Configuration Menu Access Code
316
FeatureTimerDescription
This parameter provides configurable timing values for various features, as shown below.
•Bits 0-3—Maximum time to spend redialing if line is busy
–
Range: 0 - 15
–
Factor: five-minute increments
–
Values: 0 - 75 minutes
–
Default: 0 (= 30 minutes)
•Bits 4-7—Retry interval if line is busy
–
Range: 0 - 15
–
Factor: 15-second increments
–
Values: 0 - 225 seconds
–
Default: 0 (= 15 seconds)
•Bits 8-12—On-hook delay before a call is disconnected. Thi s feature works only when the
Cisco ATA is the terminating endpoint of the call. The user can hang up the phone in one room and
pick up the phone in another room without disconnecting the line.
–
Range: 0 - 31
–
Factor: five-second increments
–
Values: 0 - 155 seconds
–
Default: 0 (no delay)
•Bits 13-15—Amount of time the Cisco ATA waits for a "486 Busy Here" response from a PSTN
gateway after receiving a "183 Session Progress" response.
–
Range: 0 - 7
–
Factor: one-second increments
–
Values: 0 to 7 seconds
–
Default: 0 (no waiting)
•Bits 16-31—Reserved.
Value Type
Bitmap