Chapter 1 Cisco uBR7225VXR Overview
Hardware Component Descriptions
Power Supplies
The Cisco uBR7225VXR router is equipped with one of the following power supplies:
•300W AC-input power supply—The maximum AC-input power with single or dual power supply configuration is 300W. The minimum Cisco IOS Release supported on this power supply is the Cisco IOS Release 12.2(33)SCA.
•540W AC-input power supply—The maximum AC-input power with single or dual power supply configuration is less than 700W. The minimum Cisco IOS Release supported on this power supply is the Cisco IOS Release 12.2(33)SCD.
Note Ensure that you do not use a combination of these power supplies in the Cisco uBR7225VXR router.
The power supply contains a main power switch, Input OK and Output OK LEDs, AC-input power receptacle, and a two-hole grounding lug for the AC-input power supply. The grounding lug at the rear-bottom portion of the chassis provides a ground connection for electrostatic discharge (ESD) equipment.
The Cisco uBR7225VXR router supports an optional, second power supply for load-sharing and power redundancy. If you purchased a Cisco uBR7225VXR router and you want to install a second power supply, you must order the second power supply separately.
A handle on the AC-input power supply unit provides a grip point for removing and replacing the power supply. (Figure 1-8 on page 1-14shows the faceplate of the AC-input power supply.)
A single captive installation screw secures the power supply to the chassis and seats the power supply in the router midplane. The AC-input power supply has a receptacle for an AC-input power cable. A modular power cable connects the AC-input power supply to the site AC power source.
Detailed instructions for handling and replacing the Cisco uBR7225VXR universal broadband router power supply is available in Cisco uBR7200 Series Universal Broadband Router AC Power Supply Replacement Instructions.
This document is available on Cisco.com at the following URL:
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/installation/4848pwra.html
Note For the Cisco uBR7225VXR router, the 300W AC-input power supply has an electrical input current rating of 4A with 100Vac input and the 540W AC-input power supply has an electrical input current rating of 6.5A with 100Vac input.
| | Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide | | |
| | |
| OL-17309-02 | | | 1-13 | |
| | | |