Cisco Systems UBR7225VXR - page 53

3-3
Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide
OL-17309-02
Chapter3 Installing the Cisco uBR7225VXR Router
CiscouBR7225VXR Router Chassis Rack-Mounting Options
Figure3-1 Typical 4-Post Equipment Rack Posts and Mounting Strips
Mounting options are as follows:
•If you want the cable interface line card end (the front) of the chassis recessed in the rack, install
the rack-mount brackets at the rear of the chassis in the orientation shown in Figure3-2 on page 3-4.
•If you want the front of the chassis mounted flush with the front posts of the rack, install the
rack-mount brackets at the front of the chassis in the orientation shown in Figure3-3 on page 3-4.
•If you want the front of the chassis protruding out of the rack, install the rack-mount brackets at the
front of the chassis in the orientation shown in Figure3-4 on page 3-5.
•If you want the chassis in a telco-type rack, install the rack-mount brackets in the middle of the
chassis in the orientation shown in Figure3-5 on page 3-5.
18.31 in.
(46.48 cm)
hole
center-to-center
17.5 in.
(44.45 cm)
min.
Rack posts
Mounting strips
110 VAC
outlets
10327