Compaq V300, E500S manual System Board Spare Part Number Information, Armada E500 only

5.15 System Board

IMPORTANT: When replacing the system board, remove the voltage converter board and retain it for use on the new system board. A new voltage converter board is not shipped with the new system board.

Refer to Section 5.16 for voltage converter board removal procedures.

System Board

Spare Part Number Information

Armada E500 only

(all with 64 MB SDRAM)

Intel Pentium III 850-MHz processor; used					217374-001
only with config. codes beginning with JFC.
Intel Pentium III 800-MHz processor; used					217373-001
only with config. codes beginning with JFB.
Intel Pentium III 700-MHz processor; used					190804-001
only with config. codes beginning with:
DX	FMX	FMZ	FWZ	JFF
FFH
Intel Pentium III 650-MHz processor; used					177751-001
only with config. codes beginning with:
DPB	FFD5	FFD6	FFD7	FFD8
Intel Pentium III 600-MHz processor; used					177750-001
only with config. codes beginning with:
DN9	FL51	FL56	FL60	FVY1
FFD1	FL52	FL57	FL61	FVY2
FFD2	FL53	FL58	FL62	FVY3
FFD3	FL54	FL59	FL63	FVY4
FFD4	FL55
Intel Pentium III 500-MHz processor; used					165102-001
only with config. codes beginning with:
DN83	DNM	DNN	DVM	FLC
Intel Pentium III 450-MHz processor; used					165101-001
only with config. codes beginning with:
CZQ	DN84	DN85
Intel Pentium II 400-MHz processor; used					159528-001
only with config. codes beginning with:
DC	DN81	DN82
Intel Pentium II 366-MHz processor; used only					159527-001
with config. codes beginning with DJC.

Intel Celeron 600-MHz processor; used only with 200398-001 config. codes beginning with JFD and JFH.

Intel Celeron 550-MHz processor; used only			200397-001
with config. codes beginning with:
FVX	FVZ	FWB

Continued

5-30Removal and Replacement Procedures