Compaq E500S, V300 manual Installing a Modem or Modem/Network Interface Card

Installing a Modem or Modem/Network Interface Card

1.Remove the mini PCI slot cover.

2.Remove the two screws 1 that secure the modem or modem/NIC to the system board (Figure 5-4).

3.Make sure the appropriate RJ11/RJ45 covers are removed from the base enclosure.

4.Install the card into the mini PCI slot, making sure to seat the card connector on the system board 2.

Figure 5-4.Installing a Modem or Modem/Network Interface Card

Reverse the installation procedure described above to remove a modem or modem/Network Interface Card.

Removal and Replacement Procedures 5-5