Compaq E500S, V300 manual Grounding Equipment and Methods

■Avoid contact with pins, leads, or circuitry.

■Turn off power and input signals before inserting or removing connectors or test equipment.

4.7Grounding Equipment and Methods

Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.

■When seated, wear a wrist strap connected to a grounded system.

Wrist straps are flexible straps with a minimum of one megaohm

± 10% resistance in the ground cords. To provide proper ground, wear a strap snug against the skin at all times. On grounded mats with banana-plug connectors, connect a wrist strap with alligator clips.

■When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conductive floors or dissipative floor mats, use them on both feet with a minimum of one-megohm resistance between the operator and ground. To be effective, the conductive strips must be worn in contact with the skin.

■Other grounding equipment recommended for use in preventing electrostatic damage includes:

■Antistatic tape

■Antistatic smocks, aprons, or sleeve protectors

■Conductive bins and other assembly or soldering aids

■Non-conductive foam

■Conductive tabletop workstations with ground cord of one-megohm resistance

■Static-dissipative table or floor mats with hard tie to ground

■Field service kits

■Static awareness labels

■Material-handling packages

■Non-conductive plastic bags, tubes, or boxes

■Metal tote boxes

■Electrostatic voltage levels and protective materials

Removal and Replacement Preliminaries 4-5