Compaq E500S, V300 manual Tools Required, Service Considerations

chapter 4

REMOVAL AND REPLACEMENT PRELIMINARIES

This chapter provides essential information for proper and safe removal and replacement service.

4.1 Tools Required

You will need the following tools to complete the removal and replacement procedures:

■Magnetic screwdriver

■Torx T-8 screwdriver

■Phillips screwdriver (for screw securing diskette drive bezel to base assembly on Armada V300 only)

■7-mm hex socket (for bushing guides)

■Tool kit (includes connector removal tool, loopback plugs, and case utility tool)

4.2Service Considerations

Listed below are some of the considerations that you should keep in mind during disassembly and assembly procedures.

IMPORTANT: As you remove each subassembly from the computer, place it (and all accompanying screws) away from the work area to prevent damage.

Removal and Replacement Preliminaries 4-1