Table 2-9

Solving Battery/Battery Gauge Problems

Problem

Possible Cause

Solution

Computer is beeping

Battery pack charge

Charge the battery

and battery power

is low.

pack by connecting it

light is blinking.

 

to an external power

 

 

source.

 

 

Replace the battery

 

 

pack with another

 

 

fully charged battery.

 

 

Initiate Hibernation or

 

 

turn the computer off

 

 

until AC power or a

 

 

fully charged battery

 

 

is available.

 

 

 

Computer battery

Volume is turned

Turn up the volume using

charge light blinks to

down too low.

the Fn+F5 hotkeys.

indicate low battery

 

 

condition, but

 

 

computer does not

 

 

beep.

 

 

 

 

 

Battery pack will not

Battery pack was

Allow time for the battery

charge.

exposed to

pack to return to room

 

temperature

temperature.

 

extremes.

 

 

 

 

 

Battery pack is

No action is required.

 

already charged.

 

 

 

 

 

Battery pack has

Use a different battery

 

exceeded its useful

pack.

 

life cycle.

 

 

 

 

Computer shut down

Hibernation was not

Work is lost.

and memory was lost

initiated before

 

when replacing the

removing the battery

 

battery pack.

pack.

 

 

 

 

Battery charge does

Battery was exposed

Move the computer to a

not last very long.

to high

cooler place and recharge

 

temperatures.

the battery pack.

 

 

 

 

 

Continued

2-20Troubleshooting

Page 56
Image 56
Compaq V300, E500S manual Solving Battery/Battery Gauge Problems