Datamax v1.1x user manual Goto Label, What is a label, Reference

Chapter 5 : Using Processes

5.2.3.Goto Label

General introduction	The Goto command is an "unconditional" branch within the label
	program. It will branch to the tags you set up in your program using
	the Set Label process (see Section 5.2.6).
What is a label	In this context, a label is a reference point in your program that can be
(reference)	set to identify a specific position in the program, such as a certain line
	in a process. Once a label reference is entered it always refers to the
	same position in your program.
	When a label is defined in a program, a direct jump to that location can
	be made from anywhere within the program.
Goto Label	To set a goto screen function, proceed as follows:
	1 Add the process Goto Label to your label program
	The Goto Label dialogue box is displayed.
Example	In this example the program will jump to the location of the reference
	point “Browse” that is set by the Set Label process.

www.mcl-collection.com

October 2007 Page 138

對 對 Copyright © 2007 • MCL Technologies • All Rights Reserved