Copyright © 2007 • MCL Technologies • All Rights Reserved
www.mcl-collection.com
Chapter 7 : Deploying a Printer Project
7.4.2. Load Font
Load font action To load a font into the printer
1 Select Load Font
A dialogue box is displayed as shown below
Load font options In the font options area:
2 Select the file name of the font you want to load into the printer,
or
3 Click the browse icon to browse for the font you want to load
4 Enter the Target Name. This is the name the font file will have
when loaded on the printer. You must enter a target file name. If
no target name is entered, 123 Print will not load the font.
5 Select the target Location. This is the drive where the font file will
be saved on the printer drive D, G, F, X, H, I or other depending
upon your printer model.
6 Enter the Font ID. This is a user assigned ID for the given font.
Once a Font ID has been assigned, subsequent references to this
font use this ID, not the font name. Please reference your Datamax
manual for more information.
7 Click the radio button beside the appropriate font type
8 Click Load
Note: Target Name and Location are not required it you are loading a
Smooth font type.
Note: Valid font file types are
*.ttf
*.sfp
*.sfl
*.cdi
October 2007 Page
197