Datamax v1.1x user manual Delay

Chapter 5 : Using Processes

5.6.1.Delay

General introduction	This section describes how to use the delay process.
	Use this process any time you want to insert a pause in your
	application. This is used frequently to display a screen for a couple of
	seconds to give a user enough time to read it.
Delay	To add a delay to your project, proceed as follows:
	1	Add the process Delay to your program and click OK
	2	In the Duration box, insert the value you want for the delay, or use
		the up/down arrows	beside the box to increment/decrement the
	3	value in the box.
		Click OK

www.mcl-collection.com

October 2007 Page 151

對 對 Copyright © 2007 • MCL Technologies • All Rights Reserved