Datamax v1.1x user manual Select Value from List, List by typing entries directly

Chapter 3 : Creating a Project

3.3.2.5. Select Value from List

General introduction	As discussed in Section 3.3.2 – Variables, Input Methods, several
	input methods are available for your screen prompts.
	This section discusses the Select Value from List input method and
	the properties you need to set up when you select this input type.

Select Value From List allows the User to select the input value from a predefined list of values or from existing variables.

For Select Value From List the property settings are as follows:

Variable/Value selection	Create the list from which the user will
	choose the desired input. Create the
	list by typing entries directly in the
	property table provided. Alternatively,
	select existing variables to create the
	list. To select a variable, click the
	variables	icon beside the table
	entry and select the desired variable
	from the Variables list box.
Result Variable	Select the variable in which the user
	input should be stored

Following is an example to illustrate the use of some of the options described above.

October 2007 Page 77

www.mcl-collection.com

對 對 Copyright © 2007 • MCL Technologies • All Rights Reserved