Datamax v1.1x user manual Add the process Goto Screen to your label program

Chapter 5 : Using Processes

5.2.4.Goto Screen

General introduction	The Goto command is an "unconditional" branch within the label
	program.
Goto Screen	To set a goto screen function, proceed as follows:
	1 Add the process Goto Screen to your label program
	The Goto Screen dialogue box is displayed

2Select the screen you want to jump to from the Goto Screen drop down box. The list includes all the screens found in your program.

3Click OK

Note: You can only go to a screen that has a process tied to it or contents on line 2 of the screen.

www.mcl-collection.com

October 2007 Page 139

對 對 Copyright © 2007 • MCL Technologies • All Rights Reserved