Copyright © 2007 • MCL Technologies • All Rights Reserved
www.mcl-collection.com
Chapter 2 : Getting Started
2.3.1. DPL Connection
DPL Connection Setup your printer interface for DPL Mode communications. In the
Setup dialogue box:
1 Click on the DPL Connection tab
If you want to use network communications for your DPL commands:
2 Edit the Printer TCP port with the appropriate port number
(typically 9100 or 3000).
If you want to use serial communications for your DPL commands:
3 Edit the Serial settings with values appropriate for your printer
These values may be found through the menu on your printer or in
your Datamax printer manual.
October 2007 Page
26