Datamax v1.1x user manual Described in .4 Load File / Control, Pause options

	Chapter 7 : Deploying a Printer Project
	4 Click any of these action icons to display the related Script Detail
	dialogue box
	5 Edit the Script Detail dialogue with settings for this action as
	described in Section 7.4 – Load File / Control
	6 Click OK
	The Script Detail action dialogue boxes are the same as the Load
	File / Control action dialogue boxes with one main difference.
	When you have completed editing the Load File / Control dialogue
	box as described in Section 7.4, you click Load to perform the
	action immediately on the connected printer.
	In Scripting, when you have completed editing the Script Detail
	dialogue box, you click OK to add the action to the Script. You
	continue adding all the actions you want to the script. You save the
	script to be executed at a later time.
Pause	The Pause action is a Scripting action that is not available as a Load File
	/ Control option in Section 7.4. Use the Pause as necessary between file
	loads in your script. For example, if you load a large file into the printer,
	you might want to delay a few seconds to give the printer time to save
	the file to memory before proceeding to the next load action in the
	script.

To insert a pause in your Script, on the Script tool bar click the icon, or on the Script menu bar:

1Click Script

2Click Add

3Select the Pause action

A Pause action dialogue box is displayed as shown here

Pause options	4	Edit the Pause for data entry field with the desired period of delay
		or use the up and down arrows	beside the data entry field to
		increment or decrement the value respectively. The period of delay
		is measured in seconds.
	5	Click OK

October 2007 Page 211

www.mcl-collection.com

對 對 Copyright © 2007 • MCL Technologies • All Rights Reserved