Copyright © 2007 • MCL Technologies • All Rights Reserved
www.mcl-collection.com
Chapter 7 : Deploying a Printer Project
7.4.5. Load Lookup
Load lookup action To load a lookup file into the printer
1 Select Load Lookup
A dialogue box is displayed as shown below
Load lookup options In the lookup options area:
2 Select the file name of the lookup you want to load into the
printer, or
3 Click the browse icon to browse for the lookup you want to load
4 Enter the Target Name. This is the name the lookup file will have
when loaded on the printer. You must enter a target file name. If
no target name is entered, 123 Print will not load the lookup file.
5 Select the target Location. This is the drive where the lookup file
will be saved on the printer— drive D, G, F, X, H, I or other
depending upon your printer model.
6 Click Load
October 2007 Page
201