Datamax v1.1x user manual Load File / Control

Insert Test Label

Print Config Label

Reset Printer

Send Date Time

Chapter 7 : Deploying a Printer Project

1Click to print a Datamax factory defined test label

1Click to print a Datamax factory defined configuration label

1Click to reset the selected printer

1Click to update the printer’s time and date

This Send Date Time control allows you to synchronize the time and date of your printer at any time.

123 Print displays your server’s time and date in a dialogue box as shown here

	2	Click OK to send the server’s time and date to the printer
Reprint Last Label	1	Click	to reprint the last label
Print Label	1	Click	to print a label that you select

A Send Label dialogue box is displayed as show here

	2	Enter the path and file name or click the browse	icon to
		search for the label you want to print. The label to be printed must
		be in *.dpl format.
	3	Enter the quantity or use the up and down arrows	to
		increment or decrement the quantity of the label that you want to
	4	print
		Check the checkbox beside Pause Mode if the Quantity is greater
		than 1 and you want to pause the printer between each label print.
		Pause mode gives an operator time to peel and apply a label before
		the subsequent label is printed. The operator presses the PAUSE
		button on the printer’s front panel each time he / she is ready for
		the next label.
	5	Click Print
Load File / Control	Load File / Control is the Printer Control that allows you to download
	files such as firmware, labels, and MCL projects to your Datamax
	printer.

Please see Section 7.4 – Load File / Control for more information.

October 2007 Page 192

www.mcl-collection.com

對 對 Copyright © 2007 • MCL Technologies • All Rights Reserved