Datamax v1.1x Variable Concatenate, Existing variables or constants into a new variable

Chapter 5 : Using Processes

5.8.2.Variable Concatenate

General introduction	The Variable Concatenate command allows you to combine two or more
	existing variables or constants into a new variable.
Variable Concatenate	To concatenate variables, proceed as follows:
	1	Add the process Variable Concatenate to your label program.
	2	In the Data box, type a fixed value or select the variable you want
		to concatenate.
	3	To select a variable, click	beside one of the Data boxes to open
	4	the Variables dialogue box.
		Select the desired variable and click OK.
	5	Repeat steps 2 to 4 for the next variable.

When all the variables and fixed content have been identified for concatenation,

6 Click beside the Result Variable box.

7Select or create the variable that will contain the combined data and click OK

8Click OK

Example	In this example, the fixed text (P) PRODUCT and the contents found in
	variable [A1] are concatenated together. The result is saved in variable
	[C0].

www.mcl-collection.com

October 2007 Page 162

對 對 Copyright © 2007 • MCL Technologies • All Rights Reserved