Dell 2150cn manual 195

Trap	Trap Address	Select the check boxes to notify trap occurrence. In
Notification 1-4	Type	this case, specify the IP address and IP socket in the
	Trap Address	following format:
		IPv4
	Port Number
		Specify the IP address and IP socket in the
	Notify
		nnn.nnn.nnn.nnn:mmmmm format. Each section of
		"nnn" is a variable value between 0 and 255. Note
		that values 127 and 224-254 are not valid for the
		first three-digits only. IP socket mmmmm is a
		variable value between 0 and 65,535.
		IPv6
		Specify the IP address and IP socket in the
		xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm
		mm format. Each section of "xxxx" is a
		hexadecimal variable value between 0 and ffff. IP
		socket mmmmm is a variable value between 0 and
		65,535.
	Authenticate	Select the check box to notify Authenticate Error
	Error Trap	Trap.

*1 The default value can be changed by using Dell Printer Configuration Web Tool.

SNMP v3

Purpose:

To edit the detailed settings of SNMP v3 protocol. To enter this page, click Edit SNMP v3 Properties in the SNMP page.

Values:

Dell Printer Configuration Web Tool

195