Dell 2150cn manual Protocol, 298, IPv4 Get IP Address AutoIP, IPsec Disable

IPv4	Get IP Address AutoIP*		Sets the IP address automatically. A random
			value in the range of 169.254.1.0 to
			169.254.254.255 that is not currently in use
			on the network is set as the IP address. The
			subnet mask is set as 255.255.0.0.
		BOOTP	Sets the IP address using BOOTP.
		RARP	Sets the IP address using RARP.
		DHCP	Sets the IP address using DHCP.
		Panel	Use this option when you want to set the IP
			address manually on the operator panel.
	IP Address		When an IP address is being set manually, the
			IP is allocated to the printer using the format
			nnn.nnn.nnn.nnn. Each octet that makes up
			nnn.nnn.nnn.nnn is a value in the range of 0
			to 254. 127 and any value in the range of 224
			to 254 cannot be specified for the first octet
			of a gateway address.
	Subnet Mask		When an IP address is being set manually, the
			subnet mask is specified using the format
			nnn.nnn.nnn.nnn. Each octet that makes up
			nnn.nnn.nnn.nnn is a value in the range of 0
			to 255. 255.255.255.255 cannot be specified
			as the subnet mask.
	Gateway Address		When an IP address is being set manually, the
			gateway address is specified using the format
			nnn.nnn.nnn.nnn. Each octet that makes up
			nnn.nnn.nnn.nnn is a value in the range of 0
			to 254. 127 and any value in the range of 224
			to 254 cannot be specified for the first octet
			of a gateway address.
IPsec	Disable*		Disables IPsec.

Protocol

Purpose:

To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.

Values:

298

Understanding the Printer Menus