1 Ethernet port

To connect the printer to the network, connect one end of an Ethernet cable into the Ethernet port on the rear of the printer, and the other end to a LAN drop or hub. To setup a wireless connection, insert the wireless adapter into the wireless adapter socket on the back of the printer.

For a wireless connection, see "Installing the Optional Wireless Adapter."

NOTE: To use the wireless adapter, be sure to disconnect the network cable.

Turning on the Printer

CAUTION: Do not use extension cords or power strips.

CAUTION: The printer should not be plugged into a UPS (Uninterruptible Power Supply) system.

1Connect the power cable to the power connector on the rear of the printer, and then to a power source.

2Turn on the printer. When the printer is connected via a USB cable, the USB driver is automatically installed.

82

Connecting Your Printer

Page 84
Image 84
Dell 2150cn manual Turning on the Printer