Understanding the Tool Box Menus 265

System Settings

Purpose:
To configure the power management of the printer, auto clear time, alarm tones,
time-out time, mm/inch setting, job log auto print, position of the Print ID,
setting of the dump print, setting of the additional memory, setting of the
substitute sheet, and operator panel language settings.
Values:
Power
Saver
Timer
Sleep*1 1–30 minutes Sets the amount of transition time to the
Sleep mode after the printer finishes a
job.
3 minutes*
Deep
Sleep*1
5–60 minutes Sets the amount of transition time
between the Sleep mode and the Deep
Sleep mode.
10 minutes*
Auto Reset 45 seconds*Sets the amount of time before the
printer automatically resets the settings
on the operator panel to the defaults
when no additional settings are made.
1 minute
2 minutes
3 minutes
4 minutes