Dell 2150cn manual Operator Panel

7Press button until Start appears, and then press the (Set) button.

8Ensure that the message Please wait Wireless Setting is displayed, and start the WPS-PBC on the wireless LAN access point (Registrar), within two minutes of the step 7 operation.

NOTE: For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access point.

9When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.

Operator Panel

1Press the (Menu) button.

2Press button until Admin Menu appears, and then press the (Set) button.

3Press button until Network appears, and then press the (Set) button.

4Press button until Wireless Setup appears, and then press the (Set) button.

5Ensure that Manual Setup is displayed, and then press the (Set) button.

6Enter the SSID, and then press the (Set) button.

7Select the network mode from Infrastructure and Ad-hocdepending on your environment.

When you select Infrastructure, proceed to step 8. When you select Ad-hoc, proceed to step 9.

8Select the encryption type from No Security, WEP (64Bit), and WEP (128Bit).

When you do not set security for your wireless network:

a Ensure that No Security is displayed, and then press the (Set) button.

To use 64 bit or 128 bit WEP encryption:

a Press button until WEP (64Bit) or WEP (128Bit) appears, and then press the (Set) button.

b Enter the WEP key, and then press the (Set) button.

64

Installing Optional Accessories