10Use and buttons to enter the first octet of the IP address, and then press button.

The cursor moves to the next digit.

NOTE: You can only enter one octet at a time and must press

button

after entering each octet.

 

11Enter the rest of the octets, and then press the (Set) button.

12Press and buttons until Subnet Mask appears, and then press the

(Set) button.

13Repeat steps 10 and 11 to set Subnet Mask, and then press the (Set) button.

14Press and buttons until Gateway Address appears, and then press the (Set) button.

15Repeat steps 10 and 11 to set the Gateway Address, and then press the (Set) button.

16Turn off the printer, and then turn it on again.

When Using the Tool Box

NOTE:

1Click StartAll ProgramsDell PrintersDell 2150 Color PrinterTool Box.

NOTE: The Select Printer window appears in this step when multiple printer drivers are installed on your computer. In this case, click the name of this printer listed in Printer Names, and then click OK.

The Tool Box opens.

2Click the Printer Maintenance tab.

3Select TCP/IP Settings from the list at the left side of the page. The TCP/IP Settings page appears.

4Select the mode from IP Address Mode, and then enter the values in IP Address, Subnet Mask, and Gateway Address.

5Press the Apply New Settings button to take effect.

Setting the IP Address

85

Page 87
Image 87
Dell 2150cn manual When Using the Tool Box, Tool Box opens, Click the Printer Maintenance tab