Dell 2150cn manual USB Settings, USB Port, Power Saver Timer, 301

USB Settings

Use the USB Settings menu to change printer settings affecting a USB port.

USB Port

Purpose:

To specify whether to enable the USB port. The change becomes effective after the printer is turned off and then on again.

Values:

Disable Disables the USB interface.

Enable* Enables the USB interface.

System Settings

Use System Settings to configure the power saving mode, warning tones, time-out duration, device display language, and job log auto print settings.

NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Power Saver Timer

Purpose:

To specify the time for transition to power saver mode.

Values:

Sleep	3min.*	Specifies the time taken by the printer to enter Sleep mode
		after it finishes a job.
	1–30 min.
Deep Sleep	10min.*	Specifies the time taken by the printer to enter Deep Sleep
		mode after it has entered Sleep mode.
	5–60 min.

Enter 3 to put the printer in power saver mode 3 minutes after it finishes a job. This uses much less energy, but requires more warm-up time for the printer. Enter 3 if your printer shares an electrical circuit with room lighting and you notice lights flickering.

Understanding the Printer Menus

301