5Ensure that WPS is displayed, and then press the (Set) button.

6Press button until PIN Code appears, and then press the (Set) button.

7Write down the 8-digit PIN code displayed on the panel or press button until Print PIN Code appears, and then press the (Set) button. The PIN code is printed.

8Ensure that Start Config. is displayed, and then press the (Set) button.

9Ensure that the message Please wait Wireless Setting is displayed, and enter the PIN code displayed on the step 7 into the wireless LAN access point (Registrar).

NOTE: For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access point.

10When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.

WPS-PBC

You can start Push Button Control only from the operator panel.

NOTE: WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless configuration, by pressing the button provided on the access point via wireless routers, and then performing WPS-PBC setting on the operator panel. This setting is available only when the access point supports WPS.

1Press the (Menu) button.

2Press button until Admin Menu appears, and then press the (Set) button.

3Press button until Network appears, and then press the (Set) button.

4Press button until Wireless Setup appears, and then press the (Set) button.

5Ensure that WPS is displayed, and then press the (Set) button.

6Ensure that Push Btn. Ctrl is displayed, and then press the (Set) button.

Installing Optional Accessories

63

Page 65
Image 65
Dell 2150cn manual Wps-Pbc