Dell 2150cn manual Wps-Pin

2Select the printer, and then click the Next button. Wireless Network Settings screen appears.

NOTE: If the printer cannot detect your printer and your printer is not listed, click Enter IP Address button and enter the IP address of your printer, and then click the OK button.

3Set the wireless network settings, and then click the Next button. IP Address Settings screen appears.

NOTE: For details on each item, see "Assigning an IP Address."

4Set the IP address of the printer, and then click the Next button. Confirm the settings screen appears.

5Confirm the settings, and then click the Apply button. Complete configuration screen appears.

6Click the Next button.

For WPS-PIN,WPS-PBC,Operator Panel, and Dell Printer Configuration Web Tool, follow the on-screen instructions to configure wireless settings.

To configure wireless settings without using the video instructions, follow the following instructions.

WPS-PIN

The PIN code of WPS-PIN can only be configured from the operator panel.

NOTE: WPS-PIN (Wi-Fi Protected setup-Personal Identification Number) is a method to authenticate and register devices required for wireless configuration, by entering PIN assignments to a printer and computer. This setting, performed through access point, is available only when the access points of your wireless router supports WPS.

1Press the (Menu) button.

2Press button until Admin Menu appears, and then press the (Set) button.

3Press button until Network appears, and then press the (Set) button.

4Press button until Wireless Setup appears, and then press the (Set) button.

62

Installing Optional Accessories