272 Understanding the Tool Box Menus

Adjust Altitude

Purpose:
To specify the altitude of the location where the printer is installed.
The method for charging the photo conductor varies with barometric pressure.
Adjustments are performed by specifying the altitude of the location where the
printer is being used.
Values:

Reset Defaults

Purpose:
To initialize wired network data stored in non-volatile memory (NVM). After
executing this function and rebooting the printer, all wired network settings are
reset to their default values.
Values:

Non-Dell Toner

NOTICE: Using a non-Dell toner cartridge may severely damage your printer.
The warranty does not cover damages caused by using non-Dell toner cartridges.
Restart printer to apply new settings Click this button to restart the
printer and apply the changes.
*1 This item is available only when Auto Registration Adjustment is set to Off.
Adjust Altitude 0 meter*Sets the altitude of the location where the
printer is installed.
1000 meters
2000 meters
3000 meters
Apply New Settings After you change the settings, click this button
to apply the changes.
Restart printer to apply new settings Click this button to restart the printer and apply
the changes.
System Section Initializes the system parameters.