Enabling IGMP Snooping on the Device

1Open the Multicast Global Parameters page.

2Select Enable in the IGMP Snooping Status field.

3Click Apply Changes.

IGMP Snooping is enabled on the device.

Adding Bridge Multicast Address Members

The Bridge Multicast Group page displays the ports and LAGs attached to the Multicast service group in the Ports and LAGs tables. The Port and LAG tables also reflect the manner in which the port or LAGs joined the Multicast group. Ports can be added either to existing groups or to new Multicast service groups. The Bridge Multicast Group page permits new Multicast service groups to be created. The Bridge Multicast Group page also assigns ports to a specific Multicast service address group.

To open the Bridge Multicast Group page, click SwitchMulticast SupportBridge Multicast Group in the tree view.

Figure 7-27. Bridge Multicast Group

VLAN ID — Identifies a VLAN and contains information about the Multicast group address.

Bridge Multicast Address — Identifies the Multicast group MAC address/IP address.

Remove — When selected, removes a Bridge Multicast address.

Ports — Port that can be added to a Multicast service.

LAGs — LAGs that can be added to a Multicast service.

134

Dell PowerConnect 28xx Systems User Guide

Page 134
Image 134
Dell 28XX manual Adding Bridge Multicast Address Members, Enabling Igmp Snooping on the Device, 134