Dell 2900 owner manual Removing the Peripheral Bay Panel Tower Only

Removing the Peripheral Bay Panel (Tower Only)

NOTE: The peripheral bay panel can be removed only from inside the bezel.

1With the bezel removed from the system, place the bezel face-down on a flat working surface.

2Locate the release tabs inside the bezel at the bottom of the peripheral bay panel and press in on the tabs and push forward to slide the panel outward from the bezel. See Figure 3-3.

3Remove the panel from the front side of the bezel.

4Reinstall the bezel on the system. See "Installing the Bezel" on page 53.

Figure 3-3. Installing and Removing the Peripheral Bay Panel (Tower)

2

1

3

4

5

1	tower bezel with peripheral	2	peripheral bay panel	3	tab (2)
	bay panel
4	bezel (inside view)	5	tab slot (2)

Installing the Peripheral Bay Panel (Tower Only)

1With the bezel installed on the system, align the peripheral bay panel with the panel opening on the bezel and insert the panel, tab-end first, into the opening.

2Slide the panel downward so that the tabs enter the slots in the bezel and lock into position.

52

Installing System Components