Dell 2900 owner manual Installing a RAC Card Notch in card edge Back standoff

Figure 3-23. Installing a RAC Card

1 2

3

8

7

					4
	6		5
1	notch in card edge	2	back standoff	3	NIC connector cutout
4	RAC card	5	RAC connector 2	6	RAC connector 1
7	expansion-bay bracket	8	standoffs with card-edge clips
			(2)

5Angle the RAC card so that its NIC connector inserts through the back-panel RAC card opening. See Figure 3-23.

6Attach the card to the expansion-bay bracket:

a Position the RAC card on the expansion-bay bracket so that the plastic standoff at the back of the bracket inserts into the notch on the edge of the RAC card.

b Carefully press the back end of the card onto the two plastic standoffs until the clips on the standoffs snap over the card edges. See Figure 3-23.

88

Installing System Components