Removing and Installing Parts 109
Installing Memory CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: Before installing memory, you must remove the PCI Express x16 card.
See "Cards" on page111.
NOTICE: To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer chassis.
1
Follow the procedures in "Before You Begin" on page 97.
2
Press the securing clip at each end of the memory module connector.
1memory connector farthest
from processor (DIMM_2)
2securing clips (2) 3connector
2
3
1
book.book Page 109 Friday, April 4, 2008 12:10 PM