Dell 531 - page 124

124 Removing and Installing Parts
Installing a Hard Drive
1 Follow the procedures in "Before You Begin" on page 97.
2 Remove the computer cover (see "Removing the Computer Cover" on
page99).
3 Check the documentation for the drive to verify that it is configured for
your computer.
4 Slide the hard drive into the hard drive bay.
5 Align the slots in the hard drive with the guides in the hard drive bay.
6 Replace and tighten the four screws to secure the hard drive.
7 Connect the power and data cables to the drive.
1hard drive 2power cable 3serial ATA data cable
4system board connector 5screws (4)
2
4
3
1
5
book.book Page 124 Friday, April 4, 2008 12:10 PM