Removing and Installing Parts 127
11
Connect your computer and devices to electrical outlets, and then turn
them on.
12
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
13
Check the system setup for drive configuration changes (see "Entering
System Setup" on page172).
Floppy Drive CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, laceration by moving fan blades, or
other unexpected injuries, always unplug your computer from the electrical outlet
before opening the cover.
NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page129.
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 97.
2
Remove the computer cover (see "Removing the Computer Cover" on
page99).
3
Remove the bezel (see "Removing the Bezel" on page 118).
book.book Page 127 Friday, April 4, 2008 12:10 PM