136 Removing and Installing Parts
CD or DVD Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, laceration by moving fan blades, or
other unexpected injuries, always unplug your computer from the electrical outlet
before opening the cover.
Removing a CD or DVD Drive
1
Follow the procedures in "Before You Begin" on page 97.
2
Remove the computer cover (see "Removing the Computer Cover" on page99).
3
Remove the bezel (see "Removing the Bezel" on page 118).
4
Disconnect the CD or DVD drive data cable from the system board connector.
5
Disconnect the power cable and the CD or DVD drive data cable from the
back of the drive.
1CD or DVD drive 2data cable 3power cable
4system board connector 5screws (2)
1
2
4
3
5
book.book Page 136 Friday, April 4, 2008 12:10 PM