10Replace the computer cover (see "Replacing the Computer Cover" on page 105).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

11Connect your computer and devices to electrical outlets, and turn them on.

12See the documentation that came with the drive for instructions on installing any software required for drive operation.

Floppy Drive

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page 94.

Removing a Floppy Drive

1Follow the procedures in "Before You Begin" on page 61.

2Remove the drive panel (see "Removing the Drive Panel" on page 81).

1

2

1 power cable

2

data cable

92

Removing and Installing Parts

Page 92
Image 92
Dell DCSM, PY349 owner manual Removing a Floppy Drive