1
2
1 power cable | 2 | data cable |
6If you are installing a new floppy drive rather than replacing a drive, remove the appropriate
7Check all cable connections, and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
8Replace the drive panel (see "Replacing the Drive Panel" on page 84).
9Replace the computer cover (see "Replacing the Computer Cover" on page 105).
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
10Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
11Enter system setup (see "System Setup" on page 111) and select the appropriate Diskette Drive option.
12Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 52).
Removing and Installing Parts
95
