Installing Memory
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1Follow the procedures in "Before You Begin" on page 61.
2Press the securing clip at each end of the memory module connector.
1
2
|
|
| 3 |
|
1 memory connector farthest | 2 | securing clips (2) | 3 | connector |
from processor (DIMM_1) |
|
|
|
|
3Align the notch on the bottom of the module with the crossbar in the connector.
3
2
1
4
1 cutouts (2) | 2 | memory module | 3 | notch |
4 crossbar
68
